Take the 2-minute tour ×
Information Security Stack Exchange is a question and answer site for Information security professionals. It's 100% free, no registration required.

I just got a tablet and I want to use it to RDP into my main computer. The thing is, the first thing I did when I set up my PC was to disable RDP. I am not comfortable, and have no use for, allowing RDP connections from outside my network.

I might be using the term network wrongly; I don't have any sort of network setup, just your standard commercial router.

I tried going into the firewall settings to try to limit port 3389 and I did not see any way to limit traffic by IP address.

I am using Windows 7 ultimate.

share|improve this question
    
Is your goal to connect to your pc via your tablet from outside, or inside your local network? (From which side of the router?) –  BrianAdkins Apr 23 '13 at 1:28
1  
Did you look at Windows Firewall with advanced security? You can set up rules there for the three zones Domain, Public and private. In addition, i'd generally suggest blocking from the firewall/router (small ones are usually both) rather that on the PC. –  NULLZ Apr 23 '13 at 1:41
    
@NotCodingCoder I just read the question a couple of times. I with Brian on this: I can't tell exactly what you are you trying to do. –  Jeff Ferland Apr 24 '13 at 5:27

4 Answers 4

up vote 5 down vote accepted

You should make sure that you are using RDP with the strongest encryption levels enabled. You should also consider using the built-in windows firewall (see how to set this up with advanced settings) or another firewall to only allow connections from your tablet. You can also ensure that your router doesn't allow the RDP port from the Internet.

Other options are to run RDP over SSH. You can do this with OpenSSH, or free for personal use in Tunnelier, which I have used in the past for secured RDP over SSH (free for home use). If you go over SSH you can then use certificates, which gives you a much higher level of security since its impractical to break the certificate key in addition to your password.

share|improve this answer

The standard commercial router you mentioned do not allow any incoming connection from outside to the inside of the network. You need to specify allow the incoming connections through port forwarding. If you want to connect to the PC through the same network i.e. both tablet and PC are connection to the same local area network, you don't need to worry about outside users connection to the PC from the Internet since the NAT device (the router) won't allow it by default.

If you want to access the RDP from outside the network e.g. through the Internet, but want to restrict the access to specific IP address, I don't think the commercial router would be flexible enough for such a rule. However, you can accomplish this through your Windows firewall. In order to restrict RDP to specific IP addresses,

  1. Go to the control panel->Administrative Tools
  2. Windows Firewall with Advanced Settings
  3. Inbound Rules
  4. Remote Desktop (TCP-In)
  5. Go to the Properties->Scope tab
  6. Add the IP (or IP range) in the Remote IP addresses section

enter image description here

share|improve this answer
    
Great anwser! A photo-finish second! –  TheCatWhisperer Apr 23 '13 at 22:52

Alternatively to void_in answer, you could use a white ACL (access control list) within your rooter to allow only a specific IP to connect to your 3389 port.

share|improve this answer

Instead of configuring a filtering device e.g router why not enable filtering using windows 7 firewall. Using win firewall you can effectively limit access to networks/IP/Port and services and its fairly easy to do so.

  1. Open Windows Firewall by clicking the Start button Picture of the Start button, and then clicking Control Panel. In the search box, type firewall, and then click Windows Firewall.

  2. In the left pane, click Advanced settings. Administrator permission required If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

  3. In the Windows Firewall with Advanced Security dialog box, in the left pane, click Inbound Rules, and then, in the right pane, click New Rule.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.