I'm using Windows 10 pro x64 and I'm connected over ethernet to my WPA-encrypted adsl home network. I'm connected to a network adsl, my internet provider is Tim (Release Modem: AGAWI_4.0.7 ). The modem router is downstairs, my pc is on the upper floor. These are some of the features of my adsl, the basic ones->
max speed download: 18609 Kbps
max speed upload: 950 Kbps
IPTV service: inactive
Managed TV service: inactive
tariff profile: ADSL Flat
At Lan Interface panel I get the following information->
Indirizzo IP Modem: (an ip address, let's call it 0)
Maschera di sottorete: ( number sequence )
Stato DHCP: active
IP Iniziale DHCP: (another ip address, let's call it 1)
IP Finale DHCP: (another ip address, let's call it 2)
Stato NAT: active
IP Iniziale NAT: (ip address 1)
IP Finale NAT: (ip ddress 2)
In the panel WiFi setting I have the following->
interface Radio: active
Rete Wi-Fi (SSID): (name of my adsl network) (Visibile)
channel Radio (Automatico): 1
Ampiezza di banda (Canale): Auto 20 MHz / 40 MHz
encryption mode: WPA-PSK TKIP-AES 256 bit
encryption key: (password)
Controllo Accesso (access control): disabled
In the panel local access I see that the security authentication is "active".
I'm trying to set up a VPN connection by editing the settings in Windows 10 in the proper configuration panel (see below). My goal is to be more anonymous -when it's possible- when I surf the internet, see videos, download torrent; I also aim to be more safe when I do e-commerce. That's the reason why I want to convert my pc into a secure system, so I'm trying to configure a VPN network by exploiting my own adsl connection firstly. If I succeed I will try to do that when I'm connected to a public network->
I put the address of my modem router panel (the one I usually type on the URL bar and then enter by inserting a password; no username is required). I configured my VPN connection by inserting no username nor password; when I select it and click on "connect" I get the following error->
I also tried by putting the PPTP (Point to Point Tunnelling Protocol) as VPN type.
How can I configure my VPN connection by using Windows 10 and why I'm having this issue?