I'm changing my employer, and I'm about to leave my office computer. Due to internal regulations and my supervisor's orders, I'm unable to format the disk drive. I was hoping I would be able to do this, as I was using that computer partially for my private purposes. The computer is running Windows 7.

Beside uninstalling any software that contains my personal data (like Google Chrome or Dropbox) and clearing everything in every browser cache / history, what other steps should I undertake or take into consideration in order to leave my office computer without any personal data-related concerns?

Note that I understand that formatting the drive is the best option here (and thus I really regret that such an option was taken from me). As far as I know and understand, using an office computer for private purposes isn't the best idea. A bad thing happened, however, so comments about that won't help me in this situation.

As per comments: My computer must be fully usable after I leave the office and thus I can't simply trash my disk! :> And my Windows is not a part of a domain.

  • If your employer used a domain network, it would be easy to perform a wipe + the computer would be perfectly usable after. I've recently set-up my own home domain network and it's brilliant; my Windows profile is centrally stored and I can reinstall my computers with all programs installed in around 30 minutes. Sounds to me like your employer doesn't know much about computers, and if they do, they certainly aren't following 'best practices'; if one of the computers was infected with a virus and had to be nuked, would your employer really want to wait a couple of days for reinstallation?
    – AStopher
    Commented Sep 29, 2015 at 13:29
  • 11
    Is it actually written down that you are banned from reinstalling windows OR is it simply that the computer must be usable for the next person? I would argue a clean install for the next person would be the RESPONSIBLE thing since it guarantees a cleaner, faster experience. I'd be irritated if I got a half loaded-down sluggish system as the next person...
    – WernerCD
    Commented Sep 29, 2015 at 13:48
  • @WernerCD At a work environment it's likely not allowed or certainly frowned upon; corporate environments are locked down and each update is vetted by the security/desktop team. A fresh Windows wouldn't be set up to run on the work network properly (Active Domain, all the work software, etc.), so would be treated as a personal device. This would cause a lot more headache for the employer than is necessary.
    – TylerH
    Commented Sep 29, 2015 at 14:25
  • 2
    @TylerH As the OP's employer does not use a domain network, I wouldn't think I.T security would be too tight.
    – AStopher
    Commented Sep 29, 2015 at 16:02
  • 1
    Just reinstall that Windows. Be a bad person. Commented Sep 30, 2015 at 2:36

6 Answers 6


Note that if you were on an AD Domain, domain administrators would have had full access to your computer anyway. The usual caveats about physical access, unencrypted drives, etc, all apply, so this is not real security but will prevent subsequent users of your computer from getting easy access to your data.

If you were not part of a domain, then the best you can do is create a new administrator account, and then delete your old account and profile from the new one.

Make sure that the recycle bin has been emptied. If the Volume Snapshot Service is running, delete any volume shadow copies by running cmd with elevated privileges:

vssadmin delete shadows /for=c:

Finally run the following command for each drive:

cipher /w:c:\

Where c: in both cases is the drive letter designation. This will wipe all free space, making it unrecoverable. See this answer for more information.

  • 22
    @icecub do you have a recent citation for that? It's generally reckoned that data can't be read once overwritten, a few (e.g. 3) passes are used to be absolutely sure. Very old hard drives had some issues with data still being recoverable but there's just not enough space for that to be the case any more. It was always an analogue problem, no magic "36" or similar. More of an issue is making sure that everything including deleted files is overwritten.
    – Chris H
    Commented Sep 29, 2015 at 13:45
  • 11
    @icecub now SSDs are a different matter, but the moving sideways you mention was never a deliberate act. Here's a paper with an up-to-date picture demonstrating why a deliberately over-cautious approach from the 90s is no longer required.
    – Chris H
    Commented Sep 29, 2015 at 13:53
  • 11
    I see. I don't fully understand that document yet, but it seems my info is quite outdated. Thanks for pointing it out @ChrisH
    – icecub
    Commented Sep 29, 2015 at 14:53
  • 2
    @icecub: You're talking about drift of head alignment, which was a very real problem with tapes, less so with platters where as one track drifts away from an area, another drifts over it, and the whole platter is still covered. And modern hard drives have nearly done away with drift.
    – Ben Voigt
    Commented Sep 29, 2015 at 18:33
  • 1
    Heck, modern drives on purpose overwrite adjacent tracks. By intentionally doing so, they guarantee that there is no wasted space between tracks.
    – MSalters
    Commented Sep 30, 2015 at 8:00

First, use a software to securely delete files like Recuva or Eraser.

Apart from formatting, you will have to rewrite the empty space with 0's or 1's like @Begueradj has suggested.

There are softwares which will just do this for the empty space in the drives like CCleaner.

Just run a 3 or 7 pass wipe to rewrite and securely delete any traces of your personal data from the empty space after your delete them.

What CCleaner does is create a file and start writing 0's or 1's till your drives empty space is filled. Then it deletes the file.

Good Read: Learn How to Securely Delete Files in Windows

  • It may be worth commenting on what difference your type of drive makes (SSD vs. HDD), if any.
    – jpmc26
    Commented Sep 30, 2015 at 19:53

I suggest you a naive, tedious but still effective methode:

When you purge the data (also from recycle bin), Windows marks the related hard drive space as available for future reuse but the deleted data remains there until you use that space. Thus, you may think of storing lot of data on your hard drives so that you can reuse those available for reuse spaces. This is what you can call simply as overwriting data. As I said, this method can be manually tedious, but it is still effective.


Note that you can overwrite those deleted data with random data (sequences of 0's and 1's) Darik's Boot and Nuke (DBAN) in case you can clear a full hard drive.

  • Thanks for your answer, however, using cipher suggested in above answer sound like an easier way, than overwriting hard disk with large amount of data. And third-party software (DBAN) is no option, since I can't clear entire disk.
    – trejder
    Commented Sep 29, 2015 at 10:23
  • 1
    I did NOT ask him to wipe his HDD. My answer is described through the long paragraph. The DBAN I mentioned it as a P.S. to inform him the manual option I described can be automated but in his case he can not except if he has permission to wipe a specific HDD @cybermonkey
    – user45139
    Commented Sep 29, 2015 at 15:59

I've never actually performed and verified the process outlined in the steps below but it looks like using CloneZilla could be a viable option based on the opening paragraph:

Clonezilla is a partition and disk imaging/cloning program similar to True Image® or Norton Ghost®. It helps you to do system deployment, bare metal backup and recovery. Two types of Clonezilla are available, Clonezilla live and Clonezilla SE (server edition). Clonezilla live is suitable for single machine backup and restore. While Clonezilla SE is for massive deployment, it can clone many (40 plus!) computers simultaneously. Clonezilla saves and restores only used blocks in the harddisk. This increases the clone efficiency. With some high-end hardware in a 42-node cluster, a multicast restoring at rate 8 GB/min was reported.

Based on this, the steps you would take are:

  1. Remove/backup all known personal apps/data off of company disk
  2. Buy a hdd of equal or greater size (USB preferably)
  3. Clone company disk to USB disk
  4. Erasing the disk:
    • DBAN the company disk (effective for HDDs)
    • If using an SSD then look up the manufacturer's specific process for wiping the disk properly (Kingston SSDs)
  5. Clone USB disk to company disk

If everything goes smoothly then there should be absolutely no residual personal data left on the company disk.

  • Or you could simply erase free space ;)
    – gronostaj
    Commented Sep 29, 2015 at 13:25
  • 1
    @gronostaj that's too mainstream 8-)
    – MonkeyZeus
    Commented Sep 29, 2015 at 13:27
  • @gronostaj Also, see my update about SSDs
    – MonkeyZeus
    Commented Sep 29, 2015 at 13:33

Windows has guidelines on where application stores its data, but, unlike Linux, it does not enforce them. So you can not do any general action and be sure that you deleted all data.
The only 100% sure way is formatting the disk and zeroing it out afterwards. The only.
Otherwise, you should research on every application you used to learn where it puts data. In 90% cases this is somewhere in user profile, but in other 10% it is anywhere else, especially for old software and software made by amateurs. Then check that the data was not copied somewhere by backup software or read access boosters, did not go to swap or Temp folder.
Do not forget that files you delete go to Recycle bin. When you empty recycle bin, it may be configured so that files are copied somewhere else. Even if it is not rigged, the files "deleted" can still be read directly from HDD for some time. So you need a special application for secure file deletion.
In short, format the HDD.

  • There are multiple potential "temp" locations especially with old hardcoded paths. You should be able to find a list online. Disabling swap and deleting the swap file before cleaning the empty space would seem to be a good idea as well.
    – Chris H
    Commented Sep 29, 2015 at 13:47
  • 7
    Linux does not enforce any standards about where applications can store data beyond the program needing write access to where it is storing data.
    – Doryx
    Commented Sep 29, 2015 at 17:56
  • 1
    And application usually has write access only where it is supposed to store data, that is the user profile. Some distros go even stricter. Commented Sep 29, 2015 at 17:59
  • Not the only. You can also encrypt the disk and forget the key.
    – WoJ
    Commented Sep 30, 2015 at 18:41

Were you sensible and do everything as a user and not as admin? If so, AFTER installing everything personal, use the admin account to remove your user account. If you are paranoid, then use cipher etc. to clean up the free space but I suspect that wont be required as if you had reason to be paranoid, they would not have given you the opportunity to clean up the machine.

  • Down votes without comments or reasons are not especially useful.
    – Paul Smith
    Commented Sep 30, 2015 at 10:31
  • I did not downvote but your answer sounds like conjecture. You should comment on the question requesting for more info and then provide coherent steps to take based on known info.
    – MonkeyZeus
    Commented Sep 30, 2015 at 15:53

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .