This question is for HDD, not SDD.

Would a Neodymium magnet like this one be strong enough to wipe the contents of a hard disk drive?

How long would such an act take to destroy any data so it's not recoverable?

Would it be possible to format and continue using the drive after as if it were brand new?

Pretend it is not possible to format securely with DBAN, it's not full disk encrypted, nor is it possible to smash the drive. I am also aware that in a criminal area that would be destruction of evidence.

P.S Yes, Breaking Bad inspired me to research this, but for my own drives at close range.

  • 1
    Asked and answered here
    – BadSkillz
    Commented Apr 4, 2016 at 8:47
  • 2
    there have been a couple of talks at defcon about hdd destruction, may be of interest. IIRC they are named 'how I lost an eye...'
    – Jay
    Commented Apr 4, 2016 at 9:17
  • 1
    As BadSkillz link pointed out, you are much more likely to cause a head failure with a magnet than actually remove data from a platter. A head crash on a drive that's running, or is run afterward in some cases, may cause scoring that physically removes some data and really screws up the platters, but it might not. Data recovery is a definitely possibility still. We recover data from drives with head crashes multiple times a day. Commented Apr 4, 2016 at 13:55
  • If you want to make hdd data unrecoverable, open the drive, drill the disc in 4-5 spots and put it in the microwaves for a few minutes. Magnetizing it will probably make the head and some other elecrotics malfunction, but won;t make the disc unreadable. Commented Apr 4, 2016 at 14:12
  • 1
    I've read that some are using cheap microwaves. Use it on your own responsibilility, with caution, start on timer when you are away in safe place, it's risky, and be prepared that it's for trash after such use, but drive should be not readable ;). Other options are crunching devices, for example, nearby construction, big drill for crunching concrete, and ask guy to crunch it into pieces with tool for few bucks. ;) Commented Apr 15, 2016 at 22:43

2 Answers 2


Short answer:

That won't work. You'll need to degauss it, which will render the drive unusable.

Long answer:

Sure. Get a powerful magnet, put it next to the hard drive, with N facing the drive. Then flip it around so S faces the drive. Then flip it again, then again. Do this a few thousand times a second. If you do it any slower or just put it near the drive once, you'll just cause the bits on the platter to move a little. That will, of course, prevent the head from reading it, but it will not prevent expert forensic recovery. You will need to flip the magnet back and forth thousands of times a second to truly scramble the bits such that their patterns are completely dissociated from the place they started.

Does shaking the magnet that fast sound too hard? Well, luckily there's a method to avoid having to do it that fast, called degaussing. Degaussing is the process of using an electromagnet to generate a powerful alternating magnetic field to completely wipe a hard drive. It is one of the only methods which is generally agreed upon to obliterate all data present on a drive.

The reason that an alternating magnetic field is required involves the physics behind magnetics. It's the change in the magnetic field which transfers energy, not the magnetic field itself. Just like gravity, the mere presence of magnetism does not provide energy. This is the reason why a generator requires magnets moving around coils constantly, rather than simply being in close proximity to magnets. Now what does this have to do with flipping bits? Well, when you put the magnet near the hard drive, the act of moving it near causes some bits to move, but holding it there for a long time does little else. If you flip it around, the bits will move like crazy, being pulled by the changing field, because the change is what is providing the energy to flip bits. A human can't move a magnet enough times to reliably change all bits, but a powerful electromagnet with an alternating current can, as each switch in polarity gives out more energy.

Note that doing this will break a hard drive, and render it unusable. And I don't just mean the head will be damaged (although it will), but the guide tracks on the platter which were put there when it was manufactured, and which were never meant to be removed, will be erased as well. So no, it will not be possible to use it as if it were brand new. Degaussing will both damage the precision electronics, and erase the guide tracks which the head needs to operate. It's simply safer and more cost-effective data destruction method than the competing and equally effective method: phase transition, or literally vaporizing the hard drive itself. It also lets you recycle the materials.

You may be interested in this fun Defcon talk on hard drive destruction. They tried out various popular methods and showed which ones were and were not effective. It may surprise you (hint: thermite and drills are overrated).

  • 1
    Note that there are some degaussers that use a direct magnetic field and not an alternating one, but those fields are way stronger than what you'll find in an average magnet.
    – forest
    Commented Nov 2, 2018 at 2:31

Not without opening the hard drive. This magnet reseller tried several magnets on a running hard drive, without any bad results.

It would also probably not securely delete your data when holding magnets directly to the platter, altough it may flip some bits.

  • Okay I have a sort of off topic question: on Breaking Bad could the huge magnet (the type that move huge metal cars) erase a HDD through a wall?
    – k1308517
    Commented Apr 4, 2016 at 9:36
  • 2
    This scene? No, that is totally unrealistic.
    – Sjoerd
    Commented Apr 4, 2016 at 9:56
  • Yes. How comes it's not possible?
    – k1308517
    Commented Apr 4, 2016 at 10:12
  • 2
    @k1308517 Magnetic fields fall off with the square of the distance. So a field at a millimeter distance is a million times weaker at 1 meter. 1/1000^2= 1 million. Commented Apr 4, 2016 at 15:06

Not the answer you're looking for? Browse other questions tagged .