Whenever I open the Google Maps app on my Android mobile phone, Google always seems to know my location, and it is very accurate (usually it places me on the map even in the correct room). Also, this happens even if both WiFi adapter and GPS are off. I know WiFi adapter off doesn't really mean anything, and I have heard Google uses information about nearby routers to geolocate you. But doesn't this mean ISPs are providing Google all (or some) of their routers' location?

As far as I know, no private company aside from my ISP should know sensitive data like my location, name, etc ... So, how does Google locate me so precisely?

  • 46
    As an interesting anecdote, my DSLR doesn't have geotagging information, but if I had my phone in my pocket, took photos somewhere, and uploaded them to Google Photos it will a̶u̶t̶o̶m̶a̶g̶i̶c̶a̶l̶l̶y̶ creepily tag them with the accurate location. Commented Sep 22, 2016 at 14:55
  • 6
    There are 2 location permissions. Fine and coarse. One using gps and the other alternative data (whatever else is avaible to guess your location). In the newest android version you should be able to revoke both in the app settings under permission. (source: am android app dev) On a side note, before android 6 you agreed to the permissions on installing an app, now you can revoke them at any time. Commented Sep 22, 2016 at 18:31
  • 3
    "But doesn't this mean ISPs are providing Google all (or some) of their routers' location?" zdnet.com/article/… Commented Sep 23, 2016 at 18:52
  • 5
    @WayneWerner Because Google assumes that you are where your phone is, so if you upload photos with a timestamp it assumes they were taken at the same location your phone was at.
    – Snowbody
    Commented Sep 23, 2016 at 20:17
  • 3
    @Snowbody: I take photos with an old digital camera without GPS, upload them to Google Photos in a different location, and Google Photos still creates albums titled with the name of the place the photos were taken. The only way it has to know where they were taken is to do a Google Images search, and probably I inadvertently help it a lot by taking photos of monuments.
    – Pere
    Commented Sep 23, 2016 at 21:35

6 Answers 6


Google uses BSSID information from your WLAN Access Point to get an approximation of where you are located, even with GPS and WiFi turned off. Taken from “How does Google Maps estimate my location without GPS?”:

Google and others like Apple and Skyhook build a Database which links WLAN BSSIDs to a geographic location. A BSSID is like the MAC address of a access point that gets broadcasted by that access point. It is therefore "public viewable" if the BSSID broadcast is enabled, which is the default for most access points. The BSSID operates on a lower layer as the IP stack, you don't even have to be connected to an access point to receive these broadcasts.

So, essentially, when you ARE using WiFi and GPS, Google's database of BSSIDs is updated with a geographic location associated with that BSSID, as you've assumed. In your case, your AP is sending beacons advertising its BSSID, and because it is already in Google's database, Google Maps knows where you are based on the location of that AP.

So it's not that the ISP is giving Google the location of their routers, it's that your phone has already helped to build a database of the Access Points around you, and Google uses this data for geolocation.

Sadly, even if you get a new router and keep any and all Android devices away from it, they will still be able to approximate your location based on the cell towers your phone connects with (or maybe even your neighbor's AP!), but it won't be nearly as accurate.

I saw in the comments questions about whether or not Android phones will receive location data even with WiFi turned OFF. The answer is, yes, absolutely they can. I'm sorry I didn't make that clearer. Better check your settings if you were unaware:

The Advanced Wi-Fi settings menu for Android devices. The setting “Scanning always available” is underlined in red for emphasis. The setting's toggle switch is in the On position. The setting's in-menu explanation says “Let Google's location service and other apps scan for networks, even when Wi-Fi is off”.

This "feature" has been included since Android 4.3, and prior versions of the Android OS do not include this feature. Thanks to martinstoeckli for this information.

Although turning off this "feature" on your phone seems like the best way to prevent your BSSID from being added to the database, this isn't necessarily the case. You've got other people's phones, the phones of passers-by, and even Google's own Street View cars to contend with. Thanks to Bakuriu for pointing this out.

Though this may be the case, you can opt out of your involvement in this program by appending _nomap to the end of your SSID. Your SSID is the "name" of the network that you have chosen or have been given. For example, you connect to the SSID "Home" or "D-Link" for your WiFi at home. In order to opt out you would rename your network Home_nomap or D-Link_nomap. Thanks for the tip Andrea Gottardo. For more, refer to the Google Support article about opting out.

  • 34
    How would it get the BSSIDs with WIFI turned off? Or does "off" only mean it's not sending, but still listens to nearby network broadcasts?
    – Bergi
    Commented Sep 21, 2016 at 19:54
  • 11
    In the latest version (N) of Android, it will also scan for Bluetooth devices in the same way. Both of these can be turned off. Commented Sep 21, 2016 at 21:49
  • 21
    You can change your SSID to tell Google you don't want your access point to be part of their database. Have a look here: support.google.com/nexus/answer/1725632?hl=en "You can opt out by changing the SSID (name) of your WiFi access point (your wireless network name) so that it ends with “_nomap”. For example, if your SSID is “12345,” you would need to change it to “12345_nomap”." Commented Sep 21, 2016 at 21:50
  • 30
    Something you didn't mention: when a Google-car goes around taking pictures for StreetView it also maps the location and all wifi networks name. So taking a new router with a new network name from a different ISP might work, but only until they come near your house to update their pictures...
    – Bakuriu
    Commented Sep 22, 2016 at 6:28
  • 64
    It's also a privacy concern if you ever sell a router. It will be possible to find out its most recent active address. I bought one off a friend a few years back and my iPod Touch located me at his house for a while. Commented Sep 22, 2016 at 9:17

You disabled WiFi and GPS, but you still have cellular data turned on. That means that the phone is in communication with the local cell towers. Android uses cell tower geolocation to estimate your current location.

Each cell tower has a set of ID numbers that identifies them to the phones. It broadcasts its identity constantly so that phones can connect to it as they move around. Cellular tower antennas are directional, with each tower serving roughly three different areas; you can think of them as three pie-shaped wedges with the cell tower at the center of the pie. Each of those wedges is a "cell" (which is where the technology got its name.)

Each of the radios serving those cells transmits using a certain amount of power - the closer you are to the tower, the stronger the signal your phone receives, and vice versa. Your phone uses the received signal strength to save batteries. The farther away a cell tower is, the more power it takes your phone transmit to it. So a cell phone always tries to lock onto the strongest signal so that it can transmit using the least amount of power. A more useful way of looking at it is that received signal strength represents the rough distance to the cell tower.

So now picture that cell, shaped like a wedge of pie, with the strongest signals received closest to the tower, and weakest furthest from the tower. Imagine slicing the wedge of pie in curved lines ringing the tower, with strong signal strength in the closest slice and the weakest signal in the furthest slice. It looks (very) roughly the WiFi logo. Each of those slices represents some tiny area of the planet, and you're standing in one of them.

If you're in a larger populated area, like a city, your phone will usually get signals from more than one cell tower. So picture the intersection of overlapping slices from tower A, tower B, tower C, and tower D. The intersections define a smaller and smaller area.

So how does Google know any of where these cells, wedges, slices, and intersections are? From the billion Android phones that have GPS turned on (including yours, when your GPS was on), constantly sending reports of their GPS location and what cell towers and signal strengths they see. Google has used this data to map out where each cell is located, and what the approximate signal strength is at each point. They have a giant database on their servers with this information; your phone queries that database by making a network request that lists all cell towers that are in range, and the Google servers respond with your estimated location.

It's all very approximate, of course, because radio signals don't actually travel in perfect little pie wedges - they bounce off buildings and cars, they get absorbed by trees and walls and fog and clouds and people. And new cell towers come and go every day, so the radio transmitter landscape is frequently changing, too. The millions of reports produce only average GPS coordinates. But that's OK, because even imperfect location data is still good enough for most user needs.

Finally, for additional accuracy, the Google Play location services software on your phone keeps track of the last known location of your phone, and may use this to better estimate your current location. In particular, the last known location is a plausible estimate for your current location (under the heuristic that you might not have moved since the last time your location was queried); if this seems consistent with cell tower information, it might be used to improve the accuracy of your estimated location.

  • 18
    Great explanation of cell tower geolocation, but would this account for the accuracy OP describes?
    – INV3NT3D
    Commented Sep 21, 2016 at 19:28
  • 1
    It would certainly help, especially when you account for the massive amount of data that Google has to correlate it with (you know, everybody else) Commented Sep 22, 2016 at 14:51
  • 2
    With this approach, accuracy becomes exponentially greater the more samples you have, and given Google's market share and reach, and longevity, combined with software filtering, they are probably well beyond 4 digits precision in urban regions of the Western world by now. Commented Sep 23, 2016 at 1:19
  • As I mentioned in my comment to another answer, mobile phones can be location tracked even when they are switched off. Commented Sep 24, 2016 at 8:46
  • 1
    @INV3NT3D I would expect mapping down to a specific room to only be possible based on Wi-Fi AP BSSID or GPS positioning. If there was a set of femtocell's present in the building that might make positioning possible to a similar degree of accuracy as via Wi-Fi APs. On its own trilateration of normal cell towers will usually only leads to an accuracy of several hundred meters.
    – TafT
    Commented Sep 26, 2016 at 10:54

According to Google:

How Maps finds your current location Maps estimates where you are from sources like:

Your web browser’s location information. Your phone's location, if you have Location History turned on.

In addition, you can set your default location using the Google Maps app, so you might've done that in the past.

Try changing your default location and test again with GPS turned off

  1. Click the gear icon at top right to open a menu
  2. From that menu, click Search Settings, which opens up a new page
  3. Enter a new default location in the text box for Location
  • 1
    I have never set up my default location, and this is a new phone with an ad-hoc created Gmail account.
    – MNLR
    Commented Sep 21, 2016 at 15:06
  • 1
    What about the first part? Do you have location history turned on? Are you using Chrome on your mobile? Did you ever connect to this gmail from your home computer? Is it possible that there was any chain of events in which you allowed Google to know your location at home and this information passed on to your device via a Chrome login or another Google service? Commented Sep 21, 2016 at 15:12
  • I have connected my home PC to this Gmail account, indeed, but the question still applies. I don't use Google Chrome. I will check location history settings.
    – MNLR
    Commented Sep 21, 2016 at 15:14
  • 3
    We have a suspect :) Check out all privacy and location settings on your Google account. I can't really recall what the defaults are, but knowing big-data companies like the big G and the big M, they usually opt in new accounts for their "convenient" tracking features by default. Commented Sep 21, 2016 at 15:16

It may be the case that Google doesn't know where you ARE, but knows where you WERE before you switched everything off.

You can test this theory by switching your phone to flight mode, then moving a distance away. If your phone still thinks you are in the old location, then you know that this is the case. Then, you can switch on features on your phone one at a time, and see when it works out that you've moved. That will tell you which radio was used.

Note that, since GPS is entirely passive, a phone in flight mode may still be able to receive it's location from the GPS satellites.

  • I do this all the time to track the flight speed, especially takeoff and landing.
    – Milind R
    Commented Jul 23, 2018 at 19:02

The most of the browsers and mobile devices support Geolocation API and the HTML5 Geolocation API , which lets you share your location with your favorite web sites. A Javascript can capture your latitude and longitude and can be sent to backend web server and do fancy location-aware things like finding local businesses or showing your location on a map.

The W3C Geolocation API is an effort by the World Wide Web Consortium (W3C) to standardize an interface to retrieve the geographical location information for a client-side device.2 It defines a set of objects, ECMAScript standard compliant, that executing in the client application give the client's device location through the consulting of Location Information Servers, which are transparent for the application programming interface (API). The most common sources of location information are IP address, Wi-Fi and Bluetooth MAC address, radio-frequency identification (RFID), Wi-Fi connection location, or device Global Positioning System (GPS) and GSM/CDMA cell IDs. The location is returned with a given accuracy depending on the best location information source available


You can be traced only if you are online via.

  1. GPS (on) - the GPS provides your location and this location "can be" stored in your phone by some apps and when it senses that you are online it can transfer those information right to your location history or on their ends.

  2. Internet - The internet can trace your location via IP address tracing each known router or if you use mobile it can triangulate your location via the cell sites. It's like a triangulation using an ordinary telephone.

  3. A malware can do the same thing.

There is no way you can be traced when GPS is off and internet is off in real time.

You can turn it off in google by not allowing you're location not to be seen.


  • 13
    A malware can do the same thing.? What is this magical geographically aware malware?
    – user83454
    Commented Sep 22, 2016 at 14:34
  • 12
    "The internet can...", The network is sentient?
    – Chenmunka
    Commented Sep 22, 2016 at 14:53
  • 7
    Mike - you can very much be traced when GPS is off and internet is off. Look up cell tower triangulation, for example...
    – Rory Alsop
    Commented Sep 23, 2016 at 10:36
  • If I don't err, mobile phones can be location tracked even when it is switched off. That's why there are Farady bags on sale. (One could also wrap the phone with a number of layers of aluminium foil.) Commented Sep 23, 2016 at 19:58

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .