Your NIC will receive any 802.11 wireless communications that is within range. Packets that are not addressed to a particular device will be ignored- unless the NIC is in Monitor or Promiscuous mode.
From Wireshark documentation (https://wiki.wireshark.org/CaptureSetup/WLAN):
A 802.11 LAN uses a "broadcast medium", much like (the mostly obsolete shared) Ethernet. Compared to Ethernet, the 802.11 network is even "broader", as the transmitted packets are not limited by the cable medium. That's one of the reasons why the 802.11 network adapters have two additional mechanisms to ignore unwanted packets at the receiving side: channels and SSID's.
Therefore the NIC is purposely designed to ignore any packets that aren't addressed to that specific device. This is necessary due to the 'broadcasting' nature of a wireless AP.
Unless a wireless AP could 'beam' a signal directly to a particular NIC antenna, then that may be a way to avoid having to ignore packets. Although, this would be unlikely considering that it is common to have high density areas with many Wifi networks overlapping and the difficulty/cost in beaming a signal directly to a potentially moving target.