I stumbled across this image and something immediately stood out to me. This is a photograph of a discrete TPM card. That silver cylinder on the left is a crystal oscillator, used to tell time with very high precision. At first I thought it must be used as a clock source, but if I recall correctly, TPMs and other tamper-resistant microcontrollers rarely, if ever, use external clock sources in order to make glitching attacks more difficult. What use would a TPM have for accurate timekeeping? If it actually is being used as an external clock source, what is done, if anything, to mitigate clock glitching?


EDIT: It seems I was incorrect claiming TPMs never using an external clock. According to the datasheet for SLB9635TT2.0, the LCLK pin provides an external clock typically driven by the PCI bus (normally 1-33 MHz). However, there is no explanation in the datasheet for the oscillator.

1 Answer 1


The oscillator is a mandatory component for the TPM system to function.

The TPM module has a 100 kHz SMBus which is synced using that oscillator.

If the TPM board also has a wireless sensor node, that one also gets synced by the same oscillator.

Here's a basic schematic for the Atmel AT97SC3203S-based TPM modules:

enter image description here

  • To expand on this, the reason glitching attacks aren't an issue is because the TPM standard requires active monitoring for environmental anomalies (out-of-spec clock, over/under-voltage, even temperature or radiation extremes). At least according to some other datasheets and product briefs I've just read through.
    – forest
    May 26, 2018 at 3:12

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.