I have some IP cameras set up on my home network, which is WPA2 protected. These cameras are setup to be accessible from the Internet thru my router's DDNS address, and port number.

So for example, from my office PC I can go to http://urltomyrouter.com:12345 to see cam#1 after I input my username and password.

These cameras are Foscams FI8910W's and they do not support HTTPS. My router by the way is an Asus RT-N56U.

I assume that my credentials that I use to log into the cameras are being sent in plaintext and not encrypted, which is unsafe.

What are my options to fix this and make my access more secure?

I read somewhere that a "reverse proxy" is a possible solution but I'm not sure how that would work...

  • 1
    Are these wireless or wired cameras? If wireless, do the cameras support a wireless security protocol? Securing the data to the router doesn't do much good if you then broadcast it in the clear to the camera. Apr 28, 2014 at 7:33
  • @Clockwork-Muse FI8910W's support both, ethernet and wireless. I wired 'em when convenient otherwise I use their wireless 2.4GHz wifi antenna. They connect to a router broadcasting a WPA2 encrypted network. I wrote that in my first sentence... ;) Apr 28, 2014 at 19:22
  • Sorry, it wasn't immediately clear to me that the cameras were able to attach using the secured network. Say, that most of your home network uses WPA2, but the cameras weren't really using it.... yeah, that's not too likely is it... Apr 29, 2014 at 0:18
  • No worries :) But yeah connecting and using my ip cams within the LAN works fine. The IP cams can store the shared WPA2 LAN passkey. Since it's a securely encrypted network I would say that they are secure enough (granted not from within-the-LAN attacks). But since these IP cams are for "away from home" monitoring, I really don't monitor them when I'm in the LAN (i.e cuz I'm home!) When outside LAN do I have to login to them via HTTP since that's all they support, which is not secure to do from outside the LAN since my logging credentials would be transferred in un-encrypted traffic! Apr 29, 2014 at 1:12

2 Answers 2


I'm going to assume your router isn't smart enough to set up an encrypted reverse proxy by itself.

Conventions Used Below

  • Home IP Address: ( google search my ip to find yours )
  • WebCam IP Address / Port: on port 456.
  • Linux/Unix Computer Running Reverse Proxy:

Initial Checks

On local network can you see webcam at Great. Can you not connect to webcam from the outside world (that is is firewalled off)? Great. If not reconfigure your webcam and port forwarding/firewall rules on your router.

Next, install a webserver on a computer on your local network that is on whenever you want to connect to your webcam. I'm going to assume linux/unix and give instructions for nginx.

As a initial test, set up a reverse proxy with no encryption. Install the latest version of nginx, edit the configuration file (/etc/nginx/conf.d/default.conf) and add lines similar to:

server {
  listen 8080;
  location / {
  } # replace with your webcam's local IP address and port.

Now restart nginx (sudo /etc/init.d/nginx restart) and try connecting to the proxy ( and it should work just like if you went to If you have trouble, check everything again or consult the nginx documentation.

Getting A TLS/SSL Certificate

Now you need to add a SSL certificate and the associated private key. You can generate one signed by a certificate authority (e.g., from startssl.com for free) or generate one yourself that is self-signed (and will not be initially trusted by web browsers). Setting up a CA-signed certificate will be more complicated for a home network where you'll have to get a domain name (that you can prove to the CA you own), set up dynamic DNS to that domain name, etc. (If you are trying to get started with Dynamic DNS - https://freedns.afraid.org/ is a great place to start).

To generate a self-signed certificate, first use openssl to create a private key (in this case a 4096-bit RSA private key):

# openssl genrsa -out private.key 4096

If you are curious you can view the contents with openssl rsa -in private.key -text -noout. Next you need to generate a certificate based on that private key, which can be done with:

# openssl req -new -x509 -key private.key -out yourcert.crt -days 3650

The 3650 says it will expire in 3650 days (~10 years). Openssl will prompt you for more details, feel free to leave them blank or put any information in there. (You can view the content of your certificate with openssl x509 -in yourcert.crt -text -noout).

Now put your private key and certificate somewhere safe (e.g., in /etc/ssl/private/private.key and /etc/ssl/certs/yourcert.crt), restrict their permissions (make sure owned by root and no one else has read/write permissions).

Turn on SSL in Reverse Proxy

Then edit your nginx server configuration file to enable SSL as follows:

server {
   listen 443; # doesn't have to be port 443 - could be any port (say 8080) if you 
               # connect via .  But on port 443
               # you can just use
   ssl on;
   ssl_certificate  /etc/ssl/certs/yourcert.crt;
   ssl_certificate_key  /etc/ssl/private/private.key;
   # certificate and private key where you just placed them

   ssl_session_timeout  5m;    
   ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
   ssl_prefer_server_ciphers on;
   # reasonable SSL configuration, disable some known weak ciphers.

   location / {
     proxy_redirect $scheme://$host:$server_port/;
 # If your webcam (or other proxied application) ever gives URLs in the HTTP headers
 # (e.g., in a 302 or 304 HTTP redirect),
 # the proxy_redirect line changes the URL in the HTTP header field
 # from to

Restart nginx, and now you should be able to connect to your webcam on your local network at (you'll get warnings about certificate being untrusted as it is a self-signed certificate).

Setup port forwarding in your router

The final step is to configure your router to do port forwarding. That is when you connect to (port 443) from the outside world, set it up to port-forward to (port 443). Possibly set up dynamic DNS so if your home IP address changes it still points to the right place. Some ISPs do block port 80 and 443, so you may have to change it to some other port.

Be careful about how you connect. I've noticed many IP camera programs do not check certificates for trust (as they are often self-signed), so an attacker could possibly do a MitM attack by inserting a different self-signed certificate. It's best if you add your self-signed certificate to be trusted on your own browsers and reject it if it changes.

  • 3
    you sir, are awesome! Hmm do you think this is possible on a raspberry pi (version B) running nginx? Apr 28, 2014 at 19:27
  • 1
    @CesarDV - I don't see any reason why not. I'm not using RaspPi, but nginx is only using about ~60M total RAM so should be fine.
    – dr jimbob
    Apr 28, 2014 at 19:57
  • 1
    @unknownprotocol - I did find this helpful post that addresses your question: raspberrypi.org/forums/viewtopic.php?f=36&t=34291
    – dmikester1
    Jan 28, 2015 at 21:01
  • 1
    @dmikester1 thanks for the link! I'll check it out and compare it to the nginx reverse proxy setup I was able to get running :) Feb 3, 2015 at 7:27
  • You have my upvote, but now that I'm done installing, you actually deserve a downvote. Your nginx configuration does NOT authenticate the client. Meaning that any one can access your home cameras.
    – Tom
    Mar 9, 2019 at 12:22

Your router merely forwards packets, whichever protocol is behind it dictates the security. You can indeed, as you mentioned, would be a reverse proxy that listens on a HTTPS connection, and forwards everything to an HTTP connection. This can be done easily using Apache's mod_proxy.

Alternatively, it may look a bit like overkill, but a good way would be to set up a VPN you can connect to. This can be done easily (and free) with OpenVPN. You'd securely terminate a tunnel on your local network, and then you can access all internal resources. This may give you more flexibility in the future; you can access your entire network.

Either way, eavesdroppers won't see anything, since you're tunneled in an encrypted, authenticated connection.

  • hmm the router I have I think does support VPN... but I've been having so many issues with this router I think I might not even bother messing anymore with it... but VPN is a viable alternative though! Thanks! Apr 28, 2014 at 19:30

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .